D-Link DGS-3000 - Chapter 56 Multiple Spanning Tree Protocol (MSTP) Command List

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
608
Chapter 56 Multiple Spanning Tree
Protocol (MSTP) Command
List
enable stp
disable stp
config stp {maxage <value 6-40> | maxhops <value 6-40> | hellotime <value 1-2> | forwarddelay
<value 4-30> | txholdcount <value 1-10> | fbpdu [enable | disable] | nni_bpdu_addr [dot1d |
dot1ad]}
show stp
create stp instance_id <value 1-7>
config stp instance_id <value 1-7> [add_vlan | remove_vlan] <vidlist>
delete stp instance_id <value 1-7>
config stp mst_config_id {revision_level <int 0-65535> | name <string>}
show stp mst_config_id
config stp mst_ports <portlist> instance_id <value 0-7> { internalCost [auto | <value 1-
200000000>] | priority <value 0-240>}
config stp ports <portlist> {externalCost [auto | <value 1-200000000>] | hellotime <value 1-2> |
migrate [yes | no] |edge [true | false | auto] | p2p [true | false | auto] | state [enable | disable] |
restricted_role [true | false] | restricted_tcn [true | false] | fbpdu [enable | disable]}
show stp ports {<portlist>}
config stp priority <value 0-61440> instance_id <value 0-7>
config stp version [mstp | rstp | stp]
show stp instance {<value 0-7>}
enable stp 56-1
Description
This command is used to enable STP globally.
Format
enable stp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable STP: