D-Link DGS-3000 - Show Rmon

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
775
Restrictions
Only Administrators can issue this command.
Example
To configure the trap state for RMON events:
DGS-3000-26TC:admin#config rmon trap rising_alarm disable
Command: config rmon trap rising_alarm disable
Success.
DGS-3000-26TC:admin#
show rmon 78-39
Description
This command is used to display the RMON related setting.
Format
show rmon
Parameters
None.
Restrictions
None.
Example
To display the RMON related setting:
DGS-3000-26TC:admin#show rmon
Command: show rmon
RMON Rising Alarm Trap : Enabled
RMON Falling Alarm Trap : Enabled
DGS-3000-26TC:admin#