D-Link DGS-3000 User Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
826
Parameters
None.
Restrictions
None.
Example
To show SNTP:
DGS-3000-26TC:admin#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
IPv4 Primary SNTP Server : 10.1.1.1
IPv4 Secondary SNTP Server: 10.1.1.2
IPv6 Primary SNTP Server : ::
IPv6 Secondary SNTP Server: ::
SNTP Poll Interval : 30 sec
DGS-3000-26TC:admin#
enable sntp 87-4
Description
This command is used to turn on SNTP support.
Format
enable sntp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SNTP:

D-Link DGS-3000 Specifications

General

Brand	D-Link
Model	DGS-3000
Category	Switch
Language	English