D-Link DGS-3000 - Show Snmp View

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
760
Restrictions
Only Administrators can issue this command.
Example
To delete SNMP view “view123”:
DGS-3000-26TC:admin#delete snmp view view123 all
Command: delete snmp view view123 all
Success.
DGS-3000-26TC:admin#
show snmp view 78-16
Description
This command is used to display the SNMP view record.
Format
show snmp view {<view_name 32>}
Parameters
<view_name 32> - Enter the view name to be displayed. The name can be up to 32 characters
long.
Restrictions
None.
Example
To show SNMP view: