D-Link DGS-3000 - Show Wac Ports; Show Wac User

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
875
show wac ports 95-14
Description
This command is used to display WAC port information.
Format
show wac ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a range of member ports to display the status.
Restrictions
None.
Example
To display WAC ports 1 to 3:
DGS-3000-26TC:admin# show wac ports 1-3
Command: show wac ports 1-3
Port State Aging Time Idle Time Block Time
(min) (min) (sec)
------- -------- ------------ ---------- -----------
1 Disabled 1440 Infinite 60
2 Disabled 1440 Infinite 60
3 Disabled 1440 Infinite 60
DGS-3000-26TC:admin#
show wac user 95-15
Description
This command is used to display WAC user accounts.
Format
show wac user
Parameters
None.
Restrictions
None.