D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
486
Format
enable lldp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable LLDP:
DGS-3000-26TC:admin#enable lldp
Command: enable lldp
Success.
DGS-3000-26TC:admin#
disable lldp 46-2
Description
This command is used to stop sending and receiving of LLDP advertisement packet.
Format
disable lldp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable LLDP: