D-Link DGS-3000 - Show Autoconfig

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
115
Format
disable autoconfig
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable autoconfig:
DGS-3000-26TC:admin#disable autoconfig
Command: disable autoconfig
Success.
DGS-3000-26TC:admin#
show autoconfig 9-3
Description
This command is used to display if the auto-configuration is enabled or disabled.
Format
show autoconfig
Parameters
None.
Restrictions
None.
Example
To show autoconfig status: