D-Link DGS-3000 - Show Utilization

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
630
Example
To display the packets analysis for port 7:
DGS-3000-26TC:admin#show packet ports 7
Command: show packet ports 7
Port Number : 7
==================================================================
Frame Size/Type Frame Counts Frames/sec
--------------- ---------------------- -----------
64 0 0
65-127 0 0
128-255 0 0
256-511 0 0
512-1023 0 0
1024-1518 0 0
Unicast RX 0 0
Multicast RX 0 0
Broadcast RX 0 0
Frame Type Total Total/sec
--------------- ---------------------- -----------
RX Bytes 0 0
RX Frames 0 0
TX Bytes 0 0
TX Frames 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization 59-4
Description
This command is used to display real-time CPU or port utilization statistics.
Format
show utilization [cpu | ports]
Parameters
cpu - Specify to display information regarding the CPU.
ports - Specify all ports to be displayed.
Restrictions
None.