D-Link DGS-3000 - Page 635

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
631
Example
To display the ports utilization:
DGS-3000-26TC:admin#show utilization ports
Command: show utilization ports
Port TX/sec RX/sec Util Port TX/sec RX/sec Util
----- ---------- ---------- ---- ----- ---------- ---------- ----
1 0 0 0 21 0 0 0
2 0 0 0 22 0 0 0
3 0 0 0 23 0 0 0
4 0 0 0 24 0 0 0
5 0 0 0 25 0 0 0
6 0 0 0 26 0 0 0
7 0 0 0
8 0 0 0
9 0 0 0
10 0 0 0
11 0 0 0
12 0 0 0
13 0 0 0
14 0 0 0
15 0 0 0
16 0 0 0
17 0 0 0
18 0 0 0
19 0 0 0
20 0 0 0
DGS-3000-26TC:admin#
To display the CPU utilization:
DGS-3000-26TC:admin#show utilization cpu
Command: show utilization cpu
CPU Utilization
-------------------------------------------------------------------------------
Five seconds - 10 % One minute - 10 % Five minutes - 10 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization dram 59-5
Description
This command is used to show DRAM memory utilization.
Format
show utilization dram