D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
716
Chapter 72 RSPAN Command List
enable rspan
disable rspan
create rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]
delete rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]
config rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>] [redirect [add | delete]
ports <portlist> | source {[add | delete] ports <portlist> [rx | tx | both]}]
show rspan {[vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]}
enable rspan 72-1
Description
This command is used to enable all previously entered RSPAN configurations.
Format
enable rspan
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable all previously entered RSPAN configurations:
DGS-3000-26TC:admin#enable rspan
Command: enable rspan
Success.
DGS-3000-26TC:admin#
disable rspan 72-2
Description
This command is used to disable all previously entered RSPAN configurations.
Format
disable rspan