D-Link DGS-3000 - Config Wac User

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
873
all_users - Specify this option to delete all current WAC users.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a WAC account:
DGS-3000-26TC:admin#delete wac user duhon
Command: delete wac user duhon
Success.
DGS-3000-26TC:admin#
config wac user 95-12
Description
This command is used to change the VLAN associated with a user.
Format
config wac user <username 15> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> | clear_vlan]
Parameters
<username 15> - Enter the name of user account which will change its VID.
vlan - Specify the authentication VLAN name.
<vlan_name 32> - Enter the authentication VLAN name. The VLAN name can be up to 32
characters long.
vlanid - Specify the authentication VLAN ID.
<vlanid 1-4094> - Enter the authentication VLAN ID. The VLAN ID must be between 1 and
4094.
clear_vlan - Specify to clear the specified VLAN.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the user’s VLAN: