D-Link DGS-3000 - Show Packet Ports

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
629
Format
show errors ports <portlist>
Parameters
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.
Example
To display the errors of the port:
DGS-3000-26TC:admin#show error ports 3
Command: show error ports 3
Port Number : 3
RX Frames TX Frames
--------- ---------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
Symbol Error 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show packet ports 59-3
Description
This command is used to display statistics about the packets sent and received by the Switch.
Format
show packet ports <portlist>
Parameters
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.