DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
570
DGS-3000-26TC:admin#debug stp show information
Command: debug stp show information
Warning: only support local device.
Spanning Tree Debug Information:
----------------------------------------
Port Status In Hardware Table:
Instance 0:
Port 1 : FOR Port 2 : FOR Port 3 : FOR Port 4 : FOR Port 5 : FOR
Port 6 : FOR
Port 7 : FOR Port 8 : FOR Port 9 : FOR Port 10 : FOR Port 11 : FOR
Port 12 : FOR
Port 13 : FOR Port 14 : FOR Port 15 : FOR Port 16 : FOR Port 17 : FOR
Port 18 : FOR
Port 19 : FOR Port 20 : FOR Port 21 : FOR Port 22 : FOR Port 23 : FOR
Port 24 : FOR
Port 25 : FOR Port 26 : FOR
--------------------------------------
Root Priority And Times:
Instance 0:
Designated Root Bridge : 36795/FD-7F-C3-FF-EF-12
External Root Cost : -139756361
Regional Root Bridge : 65447/3D-D5-7D-35-D8-FF
Internal Root Cost : 1466613107
Designated Bridge : 61882/9F-F3-FF-C7-EB-B5
debug stp show flag 53-3
Description
This command is used to display the STP debug level on specified ports.
Format
debug stp show flag {ports <portlist>}
Parameters
ports - (Optional) Specify the STP ports to display.
<portlist> - (Optional) Enter the list of port used for this configuration here.