D-Link DGS-3000 - Chapter 34 Flash File System (FFS) Command List

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
360
Chapter 34 Flash File System (FFS)
Command List
show storage_media_info
md {<drive_id>} <pathname>
rd {<drive_id>} <pathname>
cd {<pathname>}
dir {<drive_id>} {<pathname>}
rename {<drive_id>} <pathname> <filename>
del {<drive_id>} <pathname> {recursive}
erase {<drive_id>} <pathname>
move {<drive_id>} <pathname> {<drive_id>} <pathname>
copy {<drive_id>} <pathname> {<drive_id>} <pathname>
show storage_media_info 34-1
Description
This command is used to display the information of the storage media available on the system.
The information for a media includes the drive number, the media identification.
Format
show storage_media_info
Parameters
None.
Restrictions
None.
Example
To display the storage media’s information:
DGS-3000-26TC:admin#show storage_media_info
Command: show storage_media_info
Drive Media Type Size Label FS Type
----- ---------- -------- ----------- -------
c:/ Flash 28 MB FFS
DGS-3000-26TC:admin#