D-Link DGS-3000 - Show Nlb Fdb

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
627
Example
To delete NLB multicast FDB entry:
DGS-3000-26TC:admin#delete nlb multicast_fdb default 03-bf-01-01-01-01
Command: delete nlb multicast_fdb default 03-bf-01-01-01-01
Success.
DGS-3000-26TC:admin#
show nlb fdb 58-7
Description
This command is used to show the NLB Configured entry.
Format
show nlb fdb
Parameters
None.
Restrictions
None.
Example
To display the NLB forwarding table:
DGS-3000-26TC:admin#show nlb fdb
Command: show nlb fdb
MAC Address VLAN ID Egress Ports
----------------- ---------- ---------------------------------------------
02-BF-01-01-01-01 - 1-5
Total Entries :1
DGS-3000-26TC:admin#