DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
170
Example
To delete a CFM MA:
DGS-3000-26TC:admin#delete cfm ma op1 md op_domain
Command: delete cfm ma op1 md op_domain
Success.
delete cfm md 16-11
Description
This command is used to delete a previously created maintenance domain. All the MEPs and
maintenance associations created in the maintenance domain will be deleted automatically.
Format
delete cfm md [<string 22> | md_index <uint 1-4294967295>]
Parameters
<string 22> - Enter the maintenance domain name. This name can be up to 22 characters long.
md_index - Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be
between 1 and 4294967295.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a CFM MD:
DGS-3000-26TC:admin#delete cfm md op_domain
Command: delete cfm md op_domain
Success.
enable cfm 16-12
Description
This command is used to enable the CFM globally.
To Next Page
Loading...
