D-Link DGS-3000 - Show Qinq Ports

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
678
Restrictions
None.
Example
To display the inner-TPID of a system:
DGS-3000-26TC:admin#show qinq inner_tpid
Command: show qinq inner_tpid
Inner TPID: 0x9100
DGS-3000-26TC:admin#
show qinq ports 68-7
Description
This command is used to display the QinQ configuration of the ports.
Format
show qinq ports {<portlist>}
Parameters
<portlist> - (Optional) Enter the list of ports to be displayed here.
Restrictions
None.
Example
To show the QinQ mode for ports 1-2: