D-Link DGS-3000 - Page 611

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
607
show mld_snooping multicast_vlan 55-26
Description
This command is used to allow information for a specific multicast VLAN to be displayed.
Format
show mld_snooping multicast_vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the name of the multicast VLAN to be displayed.
Restrictions
None.
Example
To display all MLD snooping multicast VLANs:
DGS-3000-26TC:admin#show mld_snooping multicast_vlan
Command: show mld_snooping multicast_vlan
MLD Multicast VLAN Global State : Disabled
MLD Multicast VLAN Forward Unmatched : Disabled
VLAN Name :test
VID :100
Member(Untagged) Ports :1
Tagged Member Ports :
Source Ports :3
Untagged Source Ports :
Status :Disabled
Replace Source IP :::
Remap Priority :None
Total Entries: 1
DGS-3000-26TC:admin#