D-Link DGS-3000 - Page 593

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
589
DGS-3000-26TC:admin#enable mld_snooping multicast_vlan
Command: enable mld_snooping multicast_vlan
Success.
DGS-3000-26TC:admin#
disable igmp_snooping multicast_vlan 55-3
Description
This command is used to disable the IGMP multicast VLAN function. The command disable
igmp_snooping is used to disable the ordinary IGMP snooping function. By default, the multicast
VLAN is disabled.
Format
disable igmp_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable the IGMP snooping multicast VLAN function:
DGS-3000-26TC:admin#disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DGS-3000-26TC:admin#
disable mld_snooping multicast_vlan 55-4
Description
This command is used to disable the MLD snooping multicast VLAN function. By default, the
multicast VLAN is disabled.
Format
disable mld_snooping multicast_vlan