D-Link DGS-3000 - Page 356

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
352
To filter a unicast MAC:
DGS-3000-26TC:admin#create fdb vlanid 1 00-00-00-00-02-02 drop
Command: create fdb vlanid 1 00-00-00-00-02-02 drop
Success.
DGS-3000-26TC:admin#
create multicast_fdb 33-3
Description
This command is used to create a static entry in the multicast MAC address forwarding table
(database).
Format
create multicast_fdb <vlan_name 32> <macaddr>
Parameters
<vlan_name 32> - Enter the VLAN name on which the MAC address resides. The maximum
name length is 32.
<macaddr> - Enter the multicasts MAC address to be added to the static forwarding table.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a multicast MAC forwarding entry to the default VLAN:
DGS-3000-26TC:admin#create multicast_fdb default 01-00-5E-00-00-00
Command: create multicast_fdb default 01-00-5E-00-00-00
Success.
DGS-3000-26TC:admin#
config multicast_fdb 33-4
Description
This command is used to configure the Switch’s multicast MAC address forwarding database.
Format
config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>