DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
37
config private_vlan 3-19
Description
This command is used to add or remove a secondary VLAN from a private VLAN.
Format
config private_vlan [<vlan_name 32> | vid <vlanid 2-4094>] [add [isolated | community] |
remove] [<vlan_name 32> | vlanid <vidlist>]
Parameters
<vlan_name 32> - Enter the name of the private VLAN.
vid - Specify the VLAN ID of the private VLAN.
<vlanid 2-4094> - Enter the VLAN ID used here. This value must be between 2 and 4094.
add - Specify that a secondary VLAN will be added to the private VLAN.
isolated - Specify the secondary VLAN as isolated VLAN.
community - Specify the secondary VLAN as community VLAN.
remove - Specify that a secondary VLAN will be removed from the private VLAN.
<vlan_name 32> - Enter the secondary VLAN name used. This name can be up to 32 characters
long.
vlanid - A range of secondary VLAN to add or remove to the private VLAN.
<vidlist> - Enter the secondary VLAN ID used here.
Restrictions
Only Administrators and Operators can issue this command.
Example
To associate secondary vlan to private vlan p1:
DGS-3000-26TC:admin#config private_vlan p1 add community vlanid 3
Command: config private_vlan p1 add community vlanid 3
Success.
show private_vlan 3-20
Description
This command is used to show the private VLAN information.
Format
show private_vlan {[<vlan_name 32> | vlanid<vidlist>]}
Parameters
<vlan_name 32> - (Optional) Enter the name of the private VLAN or its secondary VLAN. This
To Next Page
Loading...
