D-Link DGS-3000 - Page 72

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
68
DGS-3000-26TC:admin#config authen_enable method_list_name enable_list_1 method
tacacs+ tacacs local_enable
Command: config authen_ enable method_list_name enable_list_1 method tacacs+
tacacs local_enable
Success.
DGS-3000-26TC:admin#
delete authen_enable 5-14
Description
This command is used to delete a user-defined method list of authentication methods for
promoting user's privilege to Admin level.
Format
delete authen_enable method_list_name <string 15>
Parameters
<string 15> - Enter the user-defined method list name. This value can be up to 15 characters
long.
Restrictions
Only Administrators can issue this command.
Example
To delete a user-defined method list for promoting user's privilege to Admin level:
DGS-3000-26TC:admin#delete authen_enable method_list_name enable_list_1
Command: delete authen_enable method_list_name enable_list_1
Success.
DGS-3000-26TC:admin#
show authen_enable 5-15
Description
This command is used to display the method list of authentication methods for promoting user's
privilege to Admin level.
Format
show authen_enable [default | method_list_name <string 15> | all]