D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
9
DGS-3000-26TC:admin#show session
Command: show session
ID Live Time From Level Name
--- ------------ --------------------------------------- ----- ---------------
0 00:01:46.360 10.90.90.10 puser puser
8 00:05:49.340 Serial Port admin admin
Total Entries: 2
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show serial_port 2-2
Description
This command is used to display the current serial port settings.
Format
show serial_port
Parameters
None.
Restrictions
None.
Example
To display the serial port setting:
DGS-3000-26TC:admin#show serial_port
Command: show serial_port
Baud Rate : 115200
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DGS-3000-26TC:admin#