DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
236
DGS-3000-26TC:admin#show dhcp_relay option_61
Command: show dhcp_relay option_61
Default Relay Rule:Drop
Matching Rules:
Client-ID Type Relay Rule
----------- ---- ---------
00-11-22-33-44-55 MAC Address Drop
Total Entries : 1
config dhcp_relay ports 20-21
Description
This command is used to configure the DHCP relay of the ports.
Format
config dhcp_
relay ports [<portlist> |
all] state [enable
| disable]
Parameters
<portlist> - Enter a list of ports to be configured.
all - Specify all ports to be configured.
state - Specify the DHCP relay state of the ports.
enable - Enables the DHCP relay.
disable - Disables the DHCP relay.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DCHP relay on port 1-3:
DGS-3000-26TC:admin#config dhcp_relay ports 1-3 state enable
Command: config dhcp_relay ports 1-3 state enable
Success.
To Next Page
Loading...
