DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
247
DGS-3000-26TC:admin#create dhcp excluded_address begin_address 10.10.10.1
end_address 10.10.10.10
Command: create dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Success.
create dhcp class 21-6
Description
This command is used to create DHCP class.
Format
create dhcp class <class_name 12>
Parameters
<class_name 12> - Enter the DHCP class’s name.
Restrictions
Only Administrators and Operators can issue this command.
Example
To create a DHCP class:
DGS-3000-26TC:admin#create dhcp class class1
Command: create dhcp class class1
Success.
create dhcp pool 21-7
Description
This command is used to create a DHCP pool by specifying a name. After creating a DHCP pool,
use other DHCP pool configuration commands to configure parameters for the pool.
Format
create dhcp pool <pool_name 12>
To Next Page
Loading...
