D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
269
Parameters
<pool_name 12> - (Optional) Enter the DHCP pool name.
Restrictions
None.
Example
To display the configured manual binding entries:
DGS-3000-26TC:admin#show dhcp pool manual_binding
Command: show dhcp pool manual_binding
Pool Name IP Address Hardware Address Type
------------ ------------- ------------------ --------
p1 192.168.0.1 00-80-C8-08-13-88 Ethernet
p1 192.168.0.2 00-80-C8-08-13-99 Ethernet
Total Entries : 2
DGS-3000-26TC:admin#
show dhcp_server 21-37
Description
This command is used to display the current DHCP server configuration.
Format
show dhcp_server
Parameters
None.
Restrictions
None.
Example
To display the DHCP server status: