DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
276
disable - Disables the trap and log function.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add an entry from the DHCP server filter list in the Switch’s database:
DGS-3000-26TC:admin#config filter dhcp_server add permit server_ip 10.90.90.20
ports 1-20
Command: config filter dhcp_server add permit server_ip 10.90.90.20 ports 1-20
Success.
DGS-3000-26TC:admin#config filter dhcp_server ports 1-10 state enable
Command: config filter dhcp_server ports 1-10 state enable
Success.
DGS-3000-26TC:admin# config filter dhcp_server add permit_server_ip 10.1.1.1
client_mac 00-00-00-00-00-01 port 1-26
Command: config filter dhcp_server add permit_server_ip 10.1.1.1 client_mac 00-
00-00-00-00-01 port 1-26
Success.
config filter dhcpv6_server log 22-4
Description
This command is used to enable or disable the Filter DHCPv6 server log state.
Format
config filter dhcpv6_server log [enable | disable]
Parameters
enable - Specify that the log for the Filter DHCPv6 server will be enabled. The log for Filter
DHCPv6 server will be generated.
disable - Specify that the log for the Filter DHCPv6 server will be disabled.
To Next Page
Loading...
