D-Link DGS-3000 - Page 385

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
381
Format
disable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
Parameters
ipif - (Optional) Specify the interface name of L3 interface
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
trap - Specify to disable the trap function.
log - Specify to disable the log function.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable system interface’s gratuitous ARP log and trap:
DGS-3000-26TC:admin#disable gratuitous_arp ipif System trap log
Command: disable gratuitous_arp ipif System trap log
Success.
DGS-3000-26TC:admin#
show gratuitous_arp 36-7
Description
This command is used to display gratuitous ARP configuration.
Format
show gratuitous_arp {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the interface name of L3 interface.
<ipif_name> - Enter the IP interface name here.
Restrictions
None.
Example
To display gratuitous ARP log and trap state: