D-Link DGS-3000 - Page 414

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
410
DGS-3000-26TC:admin#show igmp_snooping statistic counter ports 1
Command: show igmp_snooping statistic counter ports 1
Port # : 1
--------------------------------------------------
Group Number : 0
Receive Statistics
Query
IGMP v1 Query : 0
IGMP v2 Query : 0
IGMP v3 Query : 0
Total : 0
Dropped By Rate Limitation : 0
Dropped By Multicast VLAN : 0
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 0
IGMP v3 Report : 0
IGMP v2 Leave : 0
Total : 0
Dropped By Rate Limitation : 0
Dropped By Max Group Limitation : 0
Dropped By Group Filter : 0
Dropped By Multicast VLAN : 0
Transmit Statistics
Query
IGMP v1 Query : 0
IGMP v2 Query : 0
IGMP v3 Query : 0
Total : 0
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 0
IGMP v3 Report : 0
IGMP v2 Leave : 0
Total : 0
Total Entries : 1
DGS-3000-26TC:admin#
show igmp access_authentication ports 38-22
Description
This command is used to display the current IGMP Access Control configuration.