D-Link DGS-3000 - Page 427

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
423
Parameters
all - Specify that all the addresses in the database that the system has auto learned and blocked
to be displayed.
vlan_name - Specify the name of the VLAN to which the blocked MAC address belongs.
<vlan_name> - Enter the VLAN name used.
mac_address - Specify the MAC address of the entry or the blocked MAC address.
<macaddr> - Enter the MAC address of the entry or the blocked MAC address.
Restrictions
None.
Example
To show the IMPB entries that are blocked:
DGS-3000-26TC:admin#show address_binding blocked all
Command: show address_binding blocked all
VID VLAN Name MAC Address Port
---- -------------------------------- ----------------- ----
1 default 00-0C-6E-AA-B9-C0 1
Total Entries : 1
DGS-3000-26TC:admin#
show address_binding ip_mac 39-10
Description
This command is used to display the IMPB entries.
Format
show address_binding ip_mac [all | [[ipaddress <ipaddr> | ipv6address <ipv6addr>]
{mac_address <macaddr>}| mac_address <macaddr>]]
Parameters
all - Specify that all the IP addresses to be displayed.
ipaddress - Specify the learned IP address of the entry in the database.
<ipaddr> - Enter the learned IP address.
ipv6address - Specify the learned IPv6 address of the entry in the database.
<ipv6addr> - Enter the learned IPv6 address.
mac_address - (Optional) Specify the MAC address of the entry in the database.
<macaddr> - Enter the MAC address here.
mac_address - Specify the MAC address in the database.
<macaddr> - Enter the binding IP MAC address.