DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
425
Format
enable address_binding dhcp_snoop {[ipv6 | all]}
Parameters
ipv6 - (Optional) Specify to enable the IPv6 entries.
all - (Optional) Specify to enable all DHCP snooping mode.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable DHCP IPv4 snooping mode:
DGS-3000-26TC:admin#enable address_binding dhcp_snoop
Command: enable address_binding dhcp_snoop
Success.
disable address_binding dhcp_snoop 39-12
Description
This command is used to disable DHCP snooping mode. When the DHCP snooping function is
disabled, all of the auto-learned binding entries will be removed.
Format
disable address_binding dhcp_snoop {[ipv6 | all]}
Parameters
ipv6 - (Optional) Specify to disable the IPv6 entries.
all - (Optional) Specify to disable all DHCP snooping mode.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable DHCP IPv4 snooping mode:
To Next Page