DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
447
enable jwac 42-1
Description
This command is used to enable the Japanese Web-based access control (JWAC) function.
Using the JWAC function, PC users need to pass two stages of authentication. The first stage is to
do the authentication with the quarantine server and the second stage is the authentication with
the Switch.
Format
enable jwac
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC:
DGS-3000-26TC:admin#enable jwac
Command: enable jwac
Success.
disable jwac 42-2
Description
This command is used to disable JWAC.
Format
disable jwac
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
To Next Page
Loading...
