DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
454
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC UDP filtering:
DGS-3000-26TC:admin#enable jwac udp_filtering
Command: enable jwac udp_filtering
Success.
disable jwac udp_filtering 42-11
Description
This command is used to disable JWAC UDP filtering.
Format
disable jwac udp_filtering
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable JWAC UDP filtering:
DGS-3000-26TC:admin#disable jwac udp_filtering
Command: disable jwac udp_filtering
Success.
To Next Page
Loading...
