D-Link DGS-3000 - Page 512

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
508
Restrictions
None.
Example
To display LLDP-MED information currently available for populating outbound LLDP-MED
advertisements for port 1:
DGS-3000-26TC:admin#show lldp_med local_ports 1
Command: show lldp_med local_ports 1
Port ID : 1
-----------------------------------------------------------------
LLDP-MED Capabilities Support:
Capabilities :Support
Network Policy :Support
Location Identification :Not Support
Extended Power Via MDI PSE :Not Support
Extended Power Via MDI PD :Not Support
Inventory :Support
Network Policy:
None
Extended Power Via MDI:
None
DGS-3000-26TC:admin#
show lldp_med remote_ports 46-21
Description
This command is used to display LLDP-MED information learned from neighbors.
Format
show lldp_med remote_ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a range of ports to be displayed.
Restrictions
None.
Example
To display remote entry information: