DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
532
DGS-3000-26TC:admin#config mac_based_access_control_local mac 00-00-00-00-00-01
vlan default
Command: config mac_based_access_control_local mac 00-00-00-00-00-01 vlan
default
Success.
delete mac_based_access_control_local 49-13
Description
This command is used to delete a MAC-based Access Control local database entry.
Format
delete mac_based_access_control_local [mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]
Parameters
mac - Deletes local database entry by specific MAC address.
<macaddr> - Enter the MAC address used here.
vlan - Deletes local database entries by specific target VLAN name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - Deletes local database entries by specific target VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the MAC-based Access Control local database entry for MAC address 00-00-00-00-00-
01:
DGS-3000-26TC:admin#delete mac_based_access_control_local mac 00-00-00-00-00-01
Command: delete mac_based_access_control_local mac 00-00-00-00-00-01
Success.
To delete the MAC-based Access Control local database entry for the VLAN name VLAN3:
To Next Page
Loading...
