DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
53
DGS-3000-26TC:admin#config 802.1x guest_vlan ports 2-8 state enable
Command: config 802.1x guest_vlan ports 2-8 state enable
Warning, The ports are moved to Guest VLAN.
Success.
config 802.1x trap state 4-20
Description
This command is used to enable or disable the sending of 802.1X traps.
Format
config 802.1x trap state [enable | disable]
Parameters
enable - Specify to enable the sending of 802.1x traps.
disable - Specify to disable the sending of 802.1x traps.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to enable the trap state for 802.1x.
DGS-3000-26TC:admin# config 802.1x trap state enable
Command: config 802.1x trap state enable
Success.
show 802.1x guest_vlan 4-21
Description
This command is used to show the information of guest VLANs.
Format
show 802.1x guest_vlan
To Next Page
Loading...
