D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
577
Parameters
ipv4 - (Optional) Specify to delete an IPv4 multicast profile.
ipv6 - (Optional) Specify to delete an IPv6 multicast profile.
profile_id - Specify the ID of the profile
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
all - All multicast address profiles will be deleted.
profile_name - Specify to display a profile based on the profile name.
<name 1-32> - Enter the profile name value here. The profile name can be up to 32
characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the multicast address profile with a profile ID of 3:
DGS-3000-26TC:admin#delete mcast_filter_profile profile_id 3
Command: delete mcast_filter_profile profile_id 3
Success.
DGS-3000-26TC:admin#
To delete the multicast address profile called MOD:
DGS-3000-26TC:admin#delete mcast_filter_profile profile_name MOD
Command: delete mcast_filter_profile profile_name MOD
Total entries: 2
DGS-3000-26TC:admin#
show mcast_filter_profile 54-5
Description
This command is used to display the defined multicast address profiles. If the IPv4 or IPv6 option
is not specified, IPv4 is implied.
Format
show mcast_filter_profile {[ipv4 | ipv6]} {[profile_id <value 1-24> | profile_name <name 1-
32>]}
Parameters
ipv4 - (Optional) Specify to display an IPv4 multicast profile.
ipv6 - (Optional) Specify to display an IPv6 multicast profile.
profile_id - (Optional) Specify the ID of the profile
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
profile_name - (Optional) Specify to display a profile based on the profile name.