D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
591
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an IGMP snooping multicast VLAN with the VLAN name mv1 and the VID 2:
DGS-3000-26TC:admin#create igmp_snoop multicast_vlan mv1 2
Command: create igmp_snoop multicast_vlan mv1 2
Success.
DGS-3000-26TC:admin#
create igmp_snooping multicast_vlan_group_profile 55-6
Description
This command is used to create an IGMP snooping multicast group profile on the Switch.
Format
create igmp_snooping multicast_vlan_group_profile <profile_name 1-32>
Parameters
<profile_name 1-32> - Enter the multicast VLAN group profile name here. The name can be up
to 32 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an IGMP snooping multicast group profile with the name “test”:
DGS-3000-26TC:admin#create igmp_snooping multicast_vlan_group_profile test
Command: create igmp_snooping multicast_vlan_group_profile test
Success.
DGS-3000-26TC:admin#
create mld_snooping multicast_vlan 55-7
Description
This command is used to create an MLD snooping multicast VLAN and implements relevant
parameters as specified. More than one multicast VLAN can be configured. Newly created MLD