D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
604
Format
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32
characters long.
Restrictions
None.
Example
To show all IGMP snooping multicast VLAN groups setup on the Switch:
DGS-3000-26TC:admin#show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VLAN Name VLAN ID Multicast Group Profiles
------------------------------- ------- ---------------------------------
mv1 2 test
DGS-3000-26TC:admin#
show igmp_snooping multicast_vlan 55-23
Description
This command is used to display information for IGMP snooping multicast VLANs.
Format
show igmp_snooping multicast_vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32
characters long.
Restrictions
None.
Example
To display all IGMP snooping multicast VLANs: