DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
611
Restrictions
None.
Example
To show STP:
DGS-3000-26TC:admin#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status : Enabled
STP Version : RSTP
Max Age : 25
Hello Time : 2
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Disabled
NNI BPDU Address : dot1d
create stp instance_id 56-5
Description
This command is used to create an MST Instance without mapping the corresponding VLANs.
Format
create stp instance_id <value 1-7>
Parameters
instance_id - Specify the MSTP instance ID. Instance 0 represents for default instance, CIST.
<value 1-7> - Enter the MSTP instance ID here. This value must be between 1 and 7.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create MSTP instance:
To Next Page
Loading...
