DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
625
Example
To delete the NLB unicast FDB entry, for the product that support the VLAN information on the
unicast forwarding:
DGS-3000-26TC:admin#delete nlb unicast_fdb 02-bf-01-01-01-01
Command: delete nlb unicast_fdb 02-BF-01-01-01-01
Success.
create nlb multicast_fdb 58-4
Description
This command is used to create a NLB multicast FDB entry.
The NLB multicast FDB entry will be mutual exclusive with the L2 multicast entry.
Format
create nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr>
Parameters
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - Specify the VLAN by the VLAN ID.
<vlanid> - Enter the VLAN ID here.
<macaddr> - Enter the MAC address of the NLB multicast FDB entry to be created.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a NLB multicast FDB entry:
DGS-3000-26TC:admin#create nlb multicast_fdb default 03-bf-01-01-01-01
Command: create nlb multicast_fdb default 03-bf-01-01-01-01
Success.
config nlb multicast_fdb 58-5
Description
This command is used to add or delete the forwarding ports for the specified NLB multicast FDB
entry.
To Next Page
Loading...
