DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
60
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable the password encryption:
DGS-3000-26TC:admin#disable password encryption
Command: disable password encryption
Success.
enable authen_policy 5-3
Description
This command is used to enable system access authentication policy.
Enable system access authentication policy. When authentication is enabled, the device will adopt
the login authentication method list to authenticate the user for login, and adopt the enable
authentication method list to authenticate the enable password for promoting the user‘s privilege to
Admin level.
Format
enable authen_policy
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable system access authentication policy:
To Next Page
Loading...
