DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
640
clear ethernet_oam ports 60-3
Description
This command is used to clear Ethernet OAM information.
Format
clear ether
net_oam ports [<portlist> |
a
ll] [event_l
o
g | statisti
c
s]
Parameters
<portlist> - Enter a range of Ethernet OAM ports to be cleared.
all - Specify to clear all Ethernet OAM ports.
event_log - Specify to clear Ethernet OAM event log information.
statistics - Specify to clear Ethernet OAM statistics.
Restrictions
Only Administrators and Operators can issue this command.
Example
To clear port 1 OAM statistics:
DGS-3000-26TC:admin#clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success.
To clear port 1 OAM events:
DGS-3000-26TC:admin#clear ethernet_oam ports 1 event_log
Command: clear ethernet_oam ports 1 event_log
Success.
To Next Page
Loading...
