DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
642
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable the password recovery mode:
DGS-3000-26TC:admin#disable password_recovery
Command: disable password_recovery
Success.
show password_recovery 61-3
Description
This command is used to display the password recovery state.
Format
show password_recovery
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display the password recovery state:
DGS-3000-26TC:admin#show password_recovery
Command: show password_recovery
Running Configuration : Enabled
NV-RAM Configuration : Enabled
To Next Page
Loading...
