D-Link DGS-3000 - Page 670

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
666
Parameters
None.
Restrictions
None.
Example
To display PPPoE circuit ID insertion status:
DGS-3000-26TC:admin#show pppoe circuit_id_insertion
Command: show pppoe circuit_id_insertion
Global PPPoE State: Enabled
DGS-3000-26TC:admin#
show pppoe circuit_id_insertion ports 66-4
Description
This command is used to display Switch’s port PPPoE Circuit ID insertion configuration.
Format
show pppoe circuit_id_insertion ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a list of ports to be displayed.
Restrictions
None.
Example
To display port 2-5 PPPoE circuit ID insertion configuration: