D-Link DGS-3000 - Page 685

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
681
DGS-3000-26TC:admin#delete vlan_translation ports 1-4
Command: delete vlan_translation ports 1-4
Success.
DGS-3000-26TC:admin#
show vlan_translation 68-10
Description
This command is used to display the existing C-VLAN-based VLAN translation rules.
Format
show vlan_translation {[ports <portlist> | cvid <vidlist>]}
Parameters
ports - (Optional) Specify a list of ports to be displayed.
<portlist> - Enter the list of ports to be displayed here.
cvid - (Optional) Specify the rules for the specified CVIDs.
<vidlist> - Enter the CVID value used here.
Restrictions
None.
Example
To show C-VLANs based on VLAN translation rules in the system:
DGS-3000-26TC:admin#show vlan_translation
Command: show vlan_translation
Port CVID SPVID Action Priority
----- -------- -------- ------- ---------
1 20 200 Replace -
1 30 300 Add -
Total Entries: 2
DGS-3000-26TC:admin#