D-Link DGS-3000 - Page 695

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
691
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the 802.1p user priority:
DGS-3000-26TC:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DGS-3000-26TC:admin#
show 802.1p user_priority 69-10
Description
This command is used to display 802.1p user priority for ports.
Format
show 802.1p user_priority
Parameters
None.
Restrictions
None.
Example
To display the 802.1p user priority: