D-Link DGS-3000 - Page 70

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
66
Parameters
default - Displays default user-defined method list for user login.
method_list_name - Displays the specific user-defined method list for user login.
<string 15> - Enter the method list name here. This value can be up to 15 characters long.
all - Displays all method lists for user login.
Restrictions
Only Administrators can issue this command.
Example
To display a user-defined method list for user login:
DGS-3000-26TC:admin#show authen_login method_list_name login_list_1
Command: show authen_login method_list_name login_list_1
Method List Name Priority Method Name Comment
---------------- -------- --------------- ------------------
login_list_1 1 tacacs+ Built-in Group
2 tacacs Built-in Group
3 mix_1 User-defined Group
4 local Keyword
DGS-3000-26TC:admin#
create authen_enable 5-12
Description
This command is used to create a user-defined method list of authentication methods for
promoting user's privilege to Admin level.
Format
create authen_enable method_list_name <string 15>
Parameters
<string 15> - Enter the user-defined method list name. This value can be up to 15 characters
long.
Restrictions
Only Administrators can issue this command.
Example
To create a user-defined method list for promoting user's privilege to Admin level: