D-Link DGS-3000 - Page 715

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
711
include - (Optional) Includes lines that contain the specified filter string.
exclude - (Optional) Excludes lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - Enter a filter string enclosed by the quotation mark symbol. Thus, the filter
string itself cannot contain the quotation mark character. The filter string is case sensitive.
<filter_string 80> - (Optional) Enter a filter string enclosed by the quotation mark symbol.
<filter_string 80> - (Optional) Enter a filter string enclosed by the quotation mark symbol.
Restrictions
Only Administrators can issue this command.
Example
To upload the current configuration from the device to an RCP server:
DGS-3000-26TC:admin# upload cfg_toRCP username rcp_user 172.18.212.104
dest_file /home/config.cfg
Command: upload cfg_toRCP username rcp_user 172.18.212.104 dest_file
/home/config.cfg
Connecting to server... Done.
Upload configuration... Done.
DGS-3000-26TC:admin#
To upload the configuration from a file system supported device to an RCP Server:
DGS-3000-26TC:admin# upload cfg_toRCP username rcp_user 172.18.212.104
dest_file /home/rcp_user/bone_switch.cfg src_file c:\config.cfg
Command: upload cfg_toRCP username rcp_user 172.18.212.104 dest_file
/home/rcp_user/bone_switch.cfg src_file c:\config.cfg
Connecting to server... Done.
Upload configuration... Done.
DGS-3000-26TC:admin#
upload log_toRCP 71-5
Description
This command is used to upload a log file from the device to a Remote Copy Protocol (RCP)
server.
Format
upload log_toRCP [{username <username 15>} {<ipaddr>} dest_file <path_filename 64> |
rcp:<string {user@}ipaddr/path_filename>]