DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
714
unspecified.
<ipaddr> - Enter the IP address of the RCP server.
username - Specify the remote user name on the RCP server.
<username> - Enter the remote user name on the RCP server.
Restrictions
Only Administrators can issue this command.
Example
To configure RCP global server information for the username “travel”:
DGS-3000-26TC:admin#config rcp server username travel
Command: config rcp server username travel
Success.
config rcp server clear 71-8
Description
This command is used to clear Remote Copy Protocol (RCP) global server information.
Format
config rcp server clear [ipaddr | username | both]
Parameters
ipaddr - Clear the IP address of the RCP server.
username - Clear the username of the RCP server.
both - Clear both the IP address and the username of the RCP server.
Restrictions
Only Administrators can issue this command.
Example
To clear the current username of the RCP global server:
DGS-3000-26TC:admin#config rcp server clear username
Command: config rcp server clear username
Success.
To Next Page
Loading...
